Product
Product Details
Automatic welder
1,Equipmed with the most advance man -computer interface device, the whole operation can be made on the touch scree.
2.Equipped with Schneider Electric Control System for all electrical elements and Servo MotorControl System.
3. Equipped with adjustable electronic static inverter power supply.
4.Equipped with failure self-detected system, system alarms automatically andprovides the solution proposal.
5.Equipped with copper-wire profiling roller in ceramic,improve theinsulation qualityandlowerthe consumption.
6. Equipped with the very durable ceramic unit on the can conveying system to reduce wear out.
7.Equipped with the standard mercury lower weldingroller non-mercuryweldingrolleralsoavailableasaoption.
8.Lower welding arm availablefor both internal powder coating andinternal lacquer spraying coating with Nordsonpump.
9.Induction oven is available for the can lineit is able to save over 90%of energy when comparing to the gas oven.
10.Rollingcoating or spraying coating is for your option for outside coating.
| Welding Speed | 80m/min (Max) |
| Production speed | 180 cans /min |
| Welding points distance | 0.5-0.85mm |
| Overlap | 0.2-0.4mm |
| Sheet thickness | 0.14-0.28mm |
| Can inner diameter | 52-99mm |
| Material | Tinplate Ni plate |
| Tin coating | Tin 5#-100# |
| Temper | T2.5- DR8 |
| Copper wire | C1.2-1.38mm |
| Power supplier | Thress phase Voltage :380 V |
| 50HZ,40KW | |
| Welding frequency | 250-820Hz |
| Cooling water | ＞400kpa/cm2 |
Internal Powder coating machine
This Powder Coating Machine use the static to spray the plastic powder onto the welding line of can body then use the heat to melt the powder to form a anti-corrosive film to cover the welding line to protect the welding line from being corroded.THis machine adopts the advanced PLC and pneumatic components to make the powder to be absorbed and adhered onto the welding line surface more reliably and steadily, and keep higher utilizing rate of the powder it is the ideal equipment for can welding line coating and coverage
Main Feature:
1.The Powder Coating Machine can be combined with any type of welding machines to form a Automatic Can Production Line.
2.The Powder supply can be controlled automaticallythe machine will alarm and stop automatically when powder use up.
3. Powder is available to be vacuum callback and recycled
4. The highly auti-abraded and anti-static quality material is adopted to the machineand the static pressure can becontrolled automatically.
| Model | PC-8 |
| Transfer speed | 10-70m/min |
| Production capacity : | 80-200can/min |
| Coating width | 8-12mm |
| Applicable can diameter | 52-280mm |
| Powder material | Polyester,Expoxies |
| Compressed air | ＜60% 0.4mpa,0.5m3/min |
| Input poweer | AC220V,50HZ |
| Power | 2.5 KW |
| Dimension | 1000x800x200mm |
External roller coating machine
Coating outside width :8-15mm
Coating ：52-180mm
Coating speed :5-30 m/min
Coating manner : Roller coating (Automatic glue-feeding)
Coating machine dimension :2100x820x1800mm
Weight：300 KG
Air compressor：0.6Mpa,20L/min
Induction over
Working principle
The induction oven works based on the principle of the high frequency big current generating the strong magnetic field in the loop, and then the strong magnetic field generating the bow wave to rise the oven temperature rapidly to make the coating material on the welding seam melted and solidified equably.
Effective heating length of single overn is 1.3 m. the lowest power consumption is 1.0kw
Coating outside width :8-15mm
Coating：52-180mm
Coating speed :5-30 m/min
Coating manner : Roller coating (Automatic glue-feeding)
Coating machine dimension :2100x820x1800mm
Weight：300 KG
Air compressor：0.6Mpa,20L/min
YouTube Video：
Basic Info：
Contact
Jiangxi United Can Equipment Co.,Ltd
Address
NO1536.Shili Road,Jiujiang Cit,Jiangxi Province,China
Sara Kang
Phone/Wechat/WhatsApp:86-15949549816
E-Mail: info@ucanequipment.com
Linda Kang
Phone/Wechat/WhatsApp:86-15062316236
E-Mail: lindakang@ucanequipment.com